A19 Pneumatic PP & PET Strapping Tool Hand Held Banding Packaging Machine for 1/2inch to 3/4inch
Product Description
Product Parameter
| Model | A19 | CA19 | A25 | B19 |
| Air pressure | 0.5-0.8MPa | 0.5-0.8MPa | 0.5-0.8MPa | 0.5-0.8MPa |
| Tension force | 3500N | 3500N | 3500N | 3500N |
| Applicable packing belt | PP/PET | PP/PET | PP/PET | PP/PET |
| Tape width | 13/16/19mm | 13/16/19mm | 19/25mm | 13/16/19mm |
| Tape thickness | 0.5-1.2mm | 0.5-1.2mm | 0.5-1.5mm | 0.5-1.2mm |
| Welding time | 2-5s | 1-3s | 2-5s | 1-3s |
| Compressed air consumption | 0.3L/min | 0.3L/min | 0.3L/min | 0.3L/min |
| Machine size | 28*16*18cm | 28*16*18cm | 28*16*18cm | 30*14.9*17.3cm |
| Machine weight | 3.82kg | 3.82kg | 3.82kg | 3.65kg |
Tape of A19/A25
Wearing method: separate the upper and lower belts
Welding speed: 3-5 seconds
Cutting mode: cutting
Product Characteristics
Quick connect connector of air pump
Easy to operate
After the packing tape is ready, press the pull-down switch button with the right hand, release it after tightening, and then press the welding button until the packaging belt is welded and cut off.
Special silence device
In order to ensure that the equipment does not produce noise during operation, a special noise elimination device is selected. The noise of the machine vibrator is greatly reduced.
Rewind button settings
After packing, press and hold the rewind button by hand until the packing belt is sent from the tension wheel to remove the packer.
Fixed cutter blank
Remove the spring tip on the fixed cutter, and then the ctter baffle of the fixed blade can be reinstalled. The compression spring is installed in the slice handle plate.
Portable design
The portable design can be taken away with just a little lifting, which is convenient for outdoor operation and suitable for packing large objects.